Air Cooler Maintenance Guide?

- May 18, 2018-


Air Cooler Maintenance Guide


The cooler, as the name implies, is a type of heat exchange equipment used to cool fluids.Usually using water or air as a refrigerant to remove heat.It can be divided into tube type cooler, plate cooler and air-cooled chiller.


Cooler is a heat exchanger widely used in metallurgy, chemical industry, energy, transportation, light industry, food and other industrial sectors.


It is suitable for different working conditions, such as cooler, condensing, heating, evaporation and waste heat recovery.Therefore, in the numerous heat exchangers, the cooler, tube heat exchanger still occupies an important position.


Most of the cooling water contains calcium, magnesium and acid carbonate. When the cooling water flows through the metal surface, there is the formation of carbonate.

Because of the rust, the heat exchange effect decreased. In severe cases, it is forced to spray the cooling water outside the shell. When the scale is serious, the tube will be blocked and the heat transfer effect will be lost.

The data of the study show that the scale sediments have great influence on the heat transfer loss.:As the increase of sediment will increase energy cost, save energy and prolong the service life of the equipment, meanwhile save production time and cost.


Traditional cleaning methods such as mechanical methods (scraping, brush), high-pressure water, chemical cleaning (pickling), etc. have a lot of problems when cleaning equipment.

It is not possible to completely remove sediment, such as scale, which causes corrosion of the equipment, and residual acid can cause secondary corrosion or corrosion of the material.In the end, the equipment is replaced, and the cleaning of waste liquid is toxic and requires a large amount of money for wastewater treatment.


Using f the teck detergent to clean the condenser, f the teck efficient, environmental protection, safety, no corrosion, not only cleaning effect is good and no corrosion to equipment, and can ensure the long-term use of condenser

Fostek cleaning agent (a unique addition of wetting agent and penetrating agent, can effectively remove the most stubborn scale (calcium carbonate), rust scale, scale, clay and other precipitates produced in water equipment.

At the same time it will not cause harm to the human body, will not produce corrosion, pitting, oxidation and other harmful reactions on steel, copper, nickel, titanium, rubber, plastics, fibers, glass, ceramics and other materials, can greatly extend the life of the equipment .


http://www.vrcoolertech.com/industrial-air-cooler/