How is the cooler installed to get the best results?

- Jul 05, 2018-


In the application of the cooler, it is necessary to properly arrange the site environment, such as installation location, ventilation and other issues need to be considered. In order to make the cooler work best, Yuanwang believes that there are two major details that must be noted.


Take the air cooler as an example:


Arrangement position


1. The air cooler should be placed on the downwind side of the device with the lowest frequency wind direction throughout the year;


2. The air cooler should be placed above the main gallery, at the top of the frame or at the top of the tower;

Note: The air cooler should not be placed above the operating temperature equal to or higher than the material's self-ignition point and the transport and storage of liquefied hydrocarbon equipment. Otherwise, the separator shall be used for isolation protection of non-combustible materials;


Multiple sets of air cooler layout rules


1. When multiple sets of air coolers are arranged together, they should be arranged in the same form, and should be arranged in a row; Part of the in-line arrangement should be avoided and the other part should be arranged in rows;


2. The distance between the two humidified air coolers or the structural columns of the dry and wet combined air coolers arranged side by side shall not be less than 3 m;


From the arrangement of a single cooler to the combination of multiple coolers, the details mentioned above require attention. If you want the cooler to work well, it is necessary to create a good working environment.