Is the choice of heat pipe type related to the media?

- Oct 10, 2018-

For the finned tube heatsink in the heat sink, if you want to fully understand, then we not only have to master the relevant knowledge content, but also can not be ignored in other aspects. Therefore, the related issues are also within the scope of their learning. In this case, plus the application of heat pipes, then below, will be carried out and carried out through some specific problems.


1. Which range of radiators and finned tubes should be wider?


In this case, from a professional point of view, the answer must be for the radiator. Generally speaking, the radiator can be divided into two categories: the domestic radiator and the industrial radiator. In the industrial radiator, it is usually Refers to the finned tube heat sink.


2. If the finned tube radiator is selected using the progressive method, then what should be known about it?


If the finned tube heatsink is selected by the progressive method, then first of all, we must clearly define the application purpose according to its specific use. Then, the heat sink structure is determined according to the condition of the medium, and which one is suitable is suitable for matching with the medium. Finally, look at the usage requirements, etc., to calculate the heat sink for the specification of the fin tube heat sink specifications.


3. In the finned tube heat sink, is there a difference between the high frequency finned tube and the ordinary finned tube? Which fin type tube is used more on this type of heat sink?


For question one, the answer is yes, because high-frequency finned tubes and ordinary finned tubes, these two are different in terms of industrial and mining requirements. So, the two are different. As for the latter question, its answer is for steel aluminum finned tubes.


For these three problems, since they are all related to the finned tube radiator, it is required to be treated and carried out well to have a good learning effect. In this way, we can use them flexibly in the actual work, so as to enhance the use of the product and its use value, so that we can benefit from it.