Functions and advantages of compressor oil cooler
Compressed air will produce a lot of heat, in order to protect the normal operation of the air compressor, heat is transmitted out
The high-temperature and high-pressure gas flows out of the lubricating oil contained in the compressor and is separated by the oil separator. The temperature of this part of lubricating oil is very high.
It can no longer be injected into the machine for lubrication, cooling, etc. The air compressor cooler is a heat exchanger used to cool the lubricating oil flowing from the oil separator, which reduces the oil temperature for reuse.
Condensers are widely used in our lives. For example, refrigerators use condensers to stop cooling. As a modern instrument, it is naturally in need of self-care. However, the maintenance of tightening oil sometimes leads to cylinder bursting due to too high air pressure or too high temperature, which requires a tightening oil cooler to help solve the problem. Let's take a closer look at the tight oil cooler.
What is the function of the compressor oil cooler
Efficiency is one of the things we need to pay attention to when it comes to tightening instruments. So in the center of the exit of the compressor, the pressure reduction becomes a problem. Due to the high temperature crossing, the resistance of liquid level control will increase. However, after adding the condensed gasoline cooler, a part of the condensed liquid can be recycled and applied. After secondary condensation, the liquid can be recycled. In this way, not only the efficiency of the compressor is improved, but also the energy is effectively applied and energy is saved.
What should be paid attention to when using the air compressor oil cooler
As the air compressor oil cooler can not be close to the corrosive environment, it can not be placed in the sun or rain environment. In addition, it is impossible to contact the environment with high air pressure, which will lead to high internal pressure of the air compressor oil cooler and the risk of cylinder explosion. In addition, because there are many interface devices for the air compressor oil cooler, the voltage is also different,
Therefore, the interface must not be connected wrongly, which will cause the machine to be damaged due to unqualified voltage. In addition, cleaning work must be done thoroughly to extend its service life.
The water-cooled oil cooler uses water as the medium and oil for heat exchange, which has the advantages of good cooling effect and can meet the requirements of low oil temperature (the oil temperature can be reduced to about 40 ℃. The disadvantage is that it can only be used in places with water source.
2. Air-cooled oil cooler uses air as the medium and oil for heat exchange. The advantage is that air is used as the cooling source, which is not limited to the place where it is used. Moreover, it is environmentally friendly. The disadvantage is that due to the influence of the ambient temperature, when the temperature is high, the oil temperature cannot be reduced to the ideal temperature (generally, it is difficult for air-cooled oil cooler to reduce the oil temperature to only 5 ~ 10 ℃ higher than the ambient temperature).